 |
Air-Flo Pro-Class Dump Bodies
The Pro-Class Series Body combines great looks with rugged durability. The body features dual side wall construction with a full welded boxed top rail for exceptional strength. The smooth clean lines of the Pro-Class will match perfectly with any modern chassis and will give you years of dependable service.
Demand the best...Demand the Pro-Class Body...Only from Air-Flo.
- Horizontal lines and gussets have smooth rounded corners for a classy modern appearance
- Double wall sides form a fully boxed top rail and include 45 degree sloped, dirt shedding subrails
- The 94 inch wide body is fully welded and made of 10 ga. steel throughout for unsurpassed strength and durability
- Exclusive Quick-Latch tailgate latching system makes tailgate operations simple and easy
- The body under structure is built with 3 inch structural steel channels spaced every 12 inches and supported by 5 inch structural channel longitudinals
- High lift capacity scissor hoist with factory installed body prop is standard equipment
|
|
 |
Air-Flo Pro-Class Stainless Dump Bodies
The Pro-Class Series Body combines great looks with rugged durability. The body features dual side wall construction with a full welded boxed top rail for exceptional strength. The smooth clean lines of the Pro-Class will match perfectly with any modern chassis and will give you years of dependable service. Demand the best...Demand the Pro-Class Body...Only from Air-Flo.
- Horizontal lines and gussets have smooth rounded corners for a classy modern appearance
- Double wall sides form a fully boxed top rail and include 45º sloped, dirt shedding subrails
- The 94” wide body is fully welded and made polished stainless steel for unsurpassed strength and durability
- Exclusive Quick-Latch® tailgate latching system makes tailgate operations simple and easy
- The under structure is built with 1/4" thick trapezoidal longitudinals that span the entire length of the body. The floor is designed and constructed so that it will not have any underbody cross member bracing.
- High lift capacity scissor hoist with factory installed body prop is standard equipment
|
|
 |
Bibeau - BBFL steel dump bodies
Manufactured in the Bibeau tradition of maximum strength at a minimum weight. The BBFL is built with steel ranging from 250 to 500 Brinell hardness, giving it the durability to hold up to your roughest jobs and the weight savings for increased payload. The AR steel and unibody design provide remarkable resistance to impact and wear.
- Standard lengths 9'0" to 13"0"
- Side heights: 24" to 36"
- Tailgate height: 30" to 48"
- Construction:
- Sides: 1/8" AR500
- Floor & Gate: 3/16" AR450
- Long sills: 3/16" AR250
|
|
 |
Bibeau - BBMT steel dump bodies
By far the most rugged of its category. With full AR450 body shell, it is unquestionably the best suited to sustain constant abuse (heavy duty excavation and demolition). Furthermore, the AR steel provides this body with an incomparable wear resistant factor as well as the ultimate resistance to impacts
- Standard lengths 9'0" to 13"0"
- Side heights: 24" to 36"
- Tailgate height: 30" to 48"
- Construction:
- Sides: 3/16" AR450
- Floor & Gate: 1/4" AR450
- Long sills: 1/4"
|
|
 |
Bibeau - BMS and BMT Stainless steel dump bodies
Bibeau Stainless bodies available for 8' to 17'6"
- Cross member-less design.
- Floor offered as Stainless or HARDOX steel plate.
- Double pleated reinforced bulkhead.
- Various cab guard lengths.
- Heavy duty tailgate with heavy duty hardware.
- High lift and Barndoor gates available.
- Most steel options are available on the stainless bodies
|
|
 |
Bibeau - BMT steel dump bodies
The BMT is without a doubt innovative and adapted to exceed the industries standards. Built with the highest steel quality steel combined with the finest engineering.
- Standard lengths 13'0" to 21"6"
- Side heights: 36" to 60"
- Tailgate height: 42" to 66"
- Capacity: 8 to 30 cubic yards
- Construction:
- Sides: 3/16" AR450
- Floor & Gate: 1/4" AR450
|
|
 |
Bibeau - MS HD steel dump bodies
The MS HD is designed for light to medium duty applications (sand, gravel and light excavation). This is the body of choice when weight is critical. The design ensures minimal weight while providing sufficient ruggedness to sustain the work load.
- Available in length from 9'0" to 13'0"
- Cross member-less design.
- Side heights: 18" to 30".
- Tailgate heights: 24" to 48".
- Smooth sides are standard.
- Various cab guard lengths.
- Heavy duty tailgate with heavy duty hardware.
- Construction:
- Sides: 1/8" AR500
- Floor & Gate: 3/16" AR250
- Long sills: 3/16"
- All steel body options are available.
|
|
 |
Bibeau - MS steel dump bodies
MS dump bodies - If price is your main focus, the MS (Medium duty) can get it done for less. Constructed of 44W with an AR200 center floor section, the MS body is up to the task.
- Available in length from 9'0" to 13'0"
- Side heights: 24" to 36"
- Tailgate heights: 30" to 48"
- Cross member-less design.
- Full 3/16" construction.
- Pleated sides standard (picture shown with optional vertical bracing).
- Various cab guard lengths.
- Heavy duty tailgate with heavy duty hardware.
- All steel options are available.
|
|
 |
Easterner 8'4" Steel Dump Body (2-3 Yard)
The Easterner dump body is the BIG name in small dumps. A body designed for New England conditions.
THIS UNIT ONLY FITS: 2007 and older GM 3500s with a 60" CA.
- 13" side height.
- 19" tailgate height.
- 88" or 94" overall width.
- 10-gauge Double Panel steel sides.
- 10-gauge steel floor.
- Fully boxed top rail.
- 3" structural channel cross members on 12" centers.
- 5" structural channel long sills.
- Snap Latch tailgate hardware.
- Sloped six panel tailgate.
- Vertical side braces.
- 24” cab protector with screen window.
- Direct lift hoist – Electric, PTO or clutch pump operated
- Twin body props on the direct lift hoist.
|
|
 |
Easterner 9' Steel Dump Body (3-4 Yard)
The Easterner dump body is the BIG name in small dumps. A body designed for New England conditions, It is available for the Ford 550, the Dodge 5500 and the GM 4500/5500 series with a 60" CA.
- 19" side height.
- 24" tailgate height.
- 94" overall width.
- 10-gauge Double Panel steel sides.
- 10-gauge steel floor.
- Fully boxed top rail.
- 3" structural channel cross members on 12" centers.
- 5" structural channel long sills.
- Snap Latch tailgate hardware.
- Sloped six panel tailgate.
- Vertical side braces.
- 24” cab protector with screen window.
- Scissor hoist – Electric, PTO or clutch pump operated
|
|
 |
Easterner 9'4" Steel Dump Body (2-3 Yard)
The Easterner dump body is the BIG name in small dumps. A body designed for New England conditions, It is available for the Ford F-350/450/550's, GM 3500's and the Dodge 3500/4500/5500 series with a 60" CA.
- 13" side height.
- 19" tailgate height.
- 94" overall width.
- 10-gauge Double Panel steel sides.
- 10-gauge steel floor.
- Fully boxed top rail.
- 3" structural channel cross members on 12" centers.
- 5" structural channel long sills.
- Snap Latch tailgate hardware.
- Sloped six panel tailgate.
- Vertical side braces.
- 24” cab protector with screen window.
- Direct lift hoist – Electric, PTO or clutch pump operated
- Twin body props on the direct lift hoist.
|
|
