|
Bibeau - BBFL steel dump bodies
Manufactured in the Bibeau tradition of maximum strength at a minimum weight. The BBFL is built with steel ranging from 250 to 500 Brinell hardness, giving it the durability to hold up to your roughest jobs and the weight savings for increased payload. The AR steel and unibody design provide remarkable resistance to impact and wear.
- Standard lengths 9'0" to 13"0"
- Side heights: 24" to 36"
- Tailgate height: 30" to 48"
- Construction:
- Sides: 1/8" AR500
- Floor & Gate: 3/16" AR450
- Long sills: 3/16" AR250
|
|
|
Bibeau - BBMT steel dump bodies
By far the most rugged of its category. With full AR450 body shell, it is unquestionably the best suited to sustain constant abuse (heavy duty excavation and demolition). Furthermore, the AR steel provides this body with an incomparable wear resistant factor as well as the ultimate resistance to impacts
- Standard lengths 9'0" to 13"0"
- Side heights: 24" to 36"
- Tailgate height: 30" to 48"
- Construction:
- Sides: 3/16" AR450
- Floor & Gate: 1/4" AR450
- Long sills: 1/4"
|
|
|
Bibeau - BMS and BMT Stainless steel dump bodies
Bibeau Stainless bodies available for 8' to 17'6"
- Cross member-less design.
- Floor offered as Stainless or HARDOX steel plate.
- Double pleated reinforced bulkhead.
- Various cab guard lengths.
- Heavy duty tailgate with heavy duty hardware.
- High lift and Barndoor gates available.
- Most steel options are available on the stainless bodies
|
|
|
Bibeau - BMT steel dump bodies
The BMT is without a doubt innovative and adapted to exceed the industries standards. Built with the highest steel quality steel combined with the finest engineering.
- Standard lengths 13'0" to 21"6"
- Side heights: 36" to 60"
- Tailgate height: 42" to 66"
- Capacity: 8 to 30 cubic yards
- Construction:
- Sides: 3/16" AR450
- Floor & Gate: 1/4" AR450
|
|
|
Bibeau - MS HD steel dump bodies
The MS HD is designed for light to medium duty applications (sand, gravel and light excavation). This is the body of choice when weight is critical. The design ensures minimal weight while providing sufficient ruggedness to sustain the work load.
- Available in length from 9'0" to 13'0"
- Cross member-less design.
- Side heights: 18" to 30".
- Tailgate heights: 24" to 48".
- Smooth sides are standard.
- Various cab guard lengths.
- Heavy duty tailgate with heavy duty hardware.
- Construction:
- Sides: 1/8" AR500
- Floor & Gate: 3/16" AR250
- Long sills: 3/16"
- All steel body options are available.
|
|
|
Bibeau - MS steel dump bodies
MS dump bodies - If price is your main focus, the MS (Medium duty) can get it done for less. Constructed of 44W with an AR200 center floor section, the MS body is up to the task.
- Available in length from 9'0" to 13'0"
- Side heights: 24" to 36"
- Tailgate heights: 30" to 48"
- Cross member-less design.
- Full 3/16" construction.
- Pleated sides standard (picture shown with optional vertical bracing).
- Various cab guard lengths.
- Heavy duty tailgate with heavy duty hardware.
- All steel options are available.
|
|