|
Airflo Sander Model: PSV
The Air-Flo PSV is an eight foot sander constructed of 304 stainless steel material. It is offered in three different power configurations: engine driven, electric or hydraulic.
- All PSV units are constructed with one piece 304 stainless steel hopper sides and conveyor, stainless steel conveyor bottom, single lift point and internal stainless steel bracing.
- Units come standard with Top Screens, Inverted ‘V’ and Hold Down Kit.
- Optional extended spinner and extended bolt on sides.
- The self-contained engine drive unit includes an electric clutch, electric throttle and 12V battery, with self-contained electrical system, powered by either a Briggs & Stratton Intek 10.5-hp IC engine or 11 hp Honda engine.
- The dual-motor electric drive features separate motors for conveyor and spinner. This highly efficient, patent pending conveyor drive ensures low amp draw. Electric cab control includes independent and variable conveyor and spinner speeds.
- The hydraulic features either single or dual motor hydraulic drive. A vehicle hydraulic system is required to power this unit.
|
|
|
Hi-Way Sander Model: E1010 aka:Super P HC
The Hi-Way E1010 deicing spreader is commonly found among the fleets of contractors, and lawn and landscape professionals. Mounted on a 26,000 lb truck, it offers increased maneuverability yet provides adequate capacity.
- The Super P HC is offered 9' and 10' length, both 80" wide.
- The hopper is only offered in 304 stainless steel construction.
- The unit is either powered by dual motor hydraulics or an 11HP Honda engine with incab controls.
- Heavy-duty two-piece hinged screens.
- Hanging inverted “V” to minimize bridging and reduce pressure on the conveyor
|
|
|
Hi-Way Sander Model: E2020
The Hi-Way E2020XT is the spreader of choice among contractors and municipalities for winter deicing.
- A heavy-duty steel 10-gauge hopper and stakes with 7-gauge steel conveyor bottom panel and sills.
- 304 stainless steel and 409 stainles steel units also available.
- A 24" wide roller conveyor chain with 3/8" x 1-1/2" cross bars for spreading deicing materials.
- The conveyor is driven by a 6:1 reduction, 98% efficient spur gear drive with a hi-torque/low-speed hydraulic motor.
- A fully enclosed hydraulic-drive spinner with two internal deflectors, a 20" diameter spinner disc including six bolt-on hardened fins and a four-section baffle to control material application.
- Optional equipment that may be ordered with the E2020XT including the following: Pintle chain, Belt-over-chain, or Straight belt conveyor in lieu of the standard roller chain for spreading a variety of materials. Series hydraulics, manual-dual hydraulics, electric-dual hydraulics, or 18 horsepower Briggs & Stratton engine is available. An inverted "V" that mounts in a fixed or swinging position. Fenders, Spill shield, Cab shield, Ladders and screens are just some of the other options available.
|
|
|
Hi-Way Sander Model: Super P
The Hi-Way Super P is the spreader of choice among contractors and municipalities for winter deicing. Designed for vehicles with 15,000lb to 20,000lb GVW
- The Super P is standard with a heavy-duty hopper
- 59 1/2" wide body with a 16 1/2" conveyor bottom
- Offered in lengths from 8' to 12'
- The Super P comes standard with a 10.5 HP Brigges & Stratton engine, nylon tiedown straps and a top screen
- An optional 11.0 HP Honda engine or hydraulic drive is available
- There are various in-cab controls for increased efficency and convenience.
|
|
|