products

Snow & Ice Equipment

Airflo Sander Model: PSV

Airflo Sander Model: PSV

The Air-Flo PSV is an eight foot sander constructed of 304 stainless steel material. It is offered in three different power configurations: engine driven, electric or hydraulic.

  • All PSV units are constructed with one piece 304 stainless steel hopper sides and conveyor, stainless steel conveyor bottom, single lift point and internal stainless steel bracing.
  • Units come standard with Top Screens, Inverted V and Hold Down Kit.
  • Optional extended spinner and extended bolt on sides.
  • The self-contained engine drive unit includes an electric clutch, electric throttle and 12V battery, with self-contained electrical system, powered by either a Briggs & Stratton Intek 10.5-hp IC engine or 11 hp Honda engine.
  • The dual-motor electric drive features separate motors for conveyor and spinner. This highly efficient, patent pending conveyor drive ensures low amp draw. Electric cab control includes independent and variable conveyor and spinner speeds.
  • The hydraulic features either single or dual motor hydraulic drive. A vehicle hydraulic system is required to power this unit.

Arctic Snow & Ice - Sectional Snow Plow

Arctic Snow & Ice - Sectional Snow Plow

The Arctic sectional snow plow offers the same effectiveness as conventional snow pushers with the improved scraping ability of the sectional cutting edges.


Everest mid-mount wing system

Everest mid-mount wing system

The mid-mount system is offered with an 8', 9', 10' or 11' wing blade. The system is designed to improve chassis weight distribution over front and rear axles. It also increases the operators vision of the side wing in both travel and plowing mode from passenger side mirror. The system allows for a clear view for the driver from all windows of the cab during both plowing and travel modes. The side wing rests closer to the chassis in travel mode than a conventional wing.

  • Weight of wing blade and system is 1,900 lbs
  • Spring loaded wing arm helps reduce side impact shocks to chassis.
  • Rear mounted wing lift cylinder for better wing control and holds wing in a ridged position in travel mode.
  • Front and rear built in wing float mechanism to allow the side wing to follow the road surface.
  • Front mount spring loaded wing trip dee designed to allow the side wing to trip forward to overcome road obstacles in plowing path, which minimizes potential wing and chassis damage.

Everest Snow Plow Model: R Series Trip Edge - Vortex

Everest Snow Plow Model: R Series Trip Edge - Vortex

The Everest R series Trip edge plow is designed for municipal applications. The plow is offered in 10', 11' and 14' lengths. Everest offer Quality by Design.

  • Reversible moldboard 35 degrees either side of bulldoze position.
  • Trip edge design plow.
  • 10 gauge or 3/16" steel skinplate.
  • Curb shoes.
  • 21" or 30.5 drive ear centers.
  • 1/2x8 cutting edge SHCP pattern.
  • 36" high intake and a 56" high discharge moldboard curl.
  • Manual or Hydraulic 3 1/2" x 16" cylinder reverse kits.
  • Optional: caster shoes, rubber deflectors and more

Everest Snow Plow Model: RL-V Series Trip Edge

Everest Snow Plow Model: RL-V Series Trip Edge

The Everest V-RL series trip edge plow is designed for municipal applications. It is modeled after the larger "Vortex' design. The plow is currently offered in 9' length Only. Everest offers Quality by Design.

  • Shown with the FISHER headgear. This unit can be tied into central hydraulics or run independently with FISHER's fleet flex hydraulics.
  • Trip edge design plow.
  • Steel skinplate.
  • 1/2x8 cutting edge SHCP pattern.
  • 30 high intake and 39" high discharge moldboard.
  • Available with a rubber deflector.
  • Also available with optional Everest A Frame to attach to an Everest 450/550 hitch.

Scoop Dogg Snow Pusher - Backhoe Model

Scoop Dogg Snow Pusher - Backhoe Model

Scoop Dogg Snow Pushers by Buyers will maximize the efficiency of Backhoes. Compared to conventional snow blades, the Scoop Dogg Snow Pusher increases the pushing capacity of your machine. Woof!

  • The Sno Pusher Backhoe Models can be used on all makes and models of loaders.
  • Available lengths: 10', 12', and 14'.
  • 39" high moldboard.
  • 3/8" thick sideplates.
  • Fits any machine.
  • 3/4" x 5" wide, AR400 friction surface wear shoes; replaceable.
  • Rubber compond cutting edge: 1-1/2" x 10"; reversible/adjustable.
  • Powder coat finish for durability and corrosion resistance.

Scoop Dogg Snow Pusher - Loader Model

Scoop Dogg Snow Pusher - Loader Model

Scoop Dogg Snow Pushers by Buyers will maximize the efficiency of Loaders. Compared to conventional snow blades, the Scoop Dogg Snow Pusher increases the pushing capacity of your machine. Woof!

  • The Sno Pusher Loader Models can be used on all makes and models of loaders.
  • Available lengths: 10', 12', 14' 16', and 18'.
  • 47" high moldboard.
  • 3/8" thick side plates.
  • Fits any machine.
  • 1" x 6" wide, AR400 friction surface wear shoes; replaceable.
  • Rubber compound cutting edge: 1-1/2" x 10"; reversible/adjustable.
  • Powder coat finish for durability and corrosion resistance.

Scoop Dogg Snow Pusher - Skid-Steer Model

Scoop Dogg Snow Pusher - Skid-Steer Model

Scoop Dogg Snow Pushers by Buyers will maximize the efficiency of Skid-Steer. Compared to conventional snow blades, the Scoop Dogg Snow Pusher increases the pushing capacity of your machine. Woof!

  • The Sno Pusher Loader Models can be used on all makes and models of skid- steers with the universal quick coupler attachment.
  • Available lengths: 8' and 10'.
  • 39" high moldboard.
  • 3/8" thick side plates.
  • Fits any machine.
  • 1" x 6" wide, AR400 friction surface wear shoes; replaceable.
  • Rubber compound cutting edge: 1" x 8"; reversible/adjustable.
  • Powder coat finish for durability and corrosion resistance