|
Everest mid-mount wing system
The mid-mount system is offered with an 8', 9', 10' or 11' wing blade. The system is designed to improve chassis weight distribution over front and rear axles. It also increases the operators vision of the side wing in both travel and plowing mode from passenger side mirror. The system allows for a clear view for the driver from all windows of the cab during both plowing and travel modes. The side wing rests closer to the chassis in travel mode than a conventional wing.
- Weight of wing blade and system is 1,900 lbs
- Spring loaded wing arm helps reduce side impact shocks to chassis.
- Rear mounted wing lift cylinder for better wing control and holds wing in a ridged position in travel mode.
- Front and rear built in wing float mechanism to allow the side wing to follow the road surface.
- Front mount spring loaded wing trip dee designed to allow the side wing to trip forward to overcome road obstacles in plowing path, which minimizes potential wing and chassis damage.
|
|
|
Everest Snow Plow Model: R Series Trip Edge
The Everest R series Trip edge plow is designed for municipal applications. The plow is offered in 10', 11' and 14' lengths. Everest offer Quality by Design.
- Reversible moldboard 35 degrees either side of bulldoze position.
- Trip edge design plow.
- 10 gauge, 3/16" or poly skinplate.
- Curb shoes.
- 21" or 30.5” drive ear centers.
- 1/2”x8” cutting edge SHCP pattern.
- 39” or 45” high moldboard curl.
- Manual, Hydraulic 3 1/2" x 16" cylinder or worm gear reverse kits.
- Optional: caster shoes, rubber deflectors and more
|
|
|
Everest Snow Plow Model: R Series Trip Edge - Vortex
The Everest R series Trip edge plow is designed for municipal applications. The plow is offered in 10', 11' and 14' lengths. Everest offer Quality by Design.
- Reversible moldboard 35 degrees either side of bulldoze position.
- Trip edge design plow.
- 10 gauge or 3/16" steel skinplate.
- Curb shoes.
- 21" or 30.5” drive ear centers.
- 1/2”x8” cutting edge SHCP pattern.
- 36" high intake and a 56" high discharge moldboard curl.
- Manual or Hydraulic 3 1/2" x 16" cylinder reverse kits.
- Optional: caster shoes, rubber deflectors and more
|
|
|
Everest Snow Plow Model: RL Series Trip Edge
The Everest RL series trip edge plow is designed for municipal applications. Its most popular application is for municipalities that require durability. The plow is offered in 8' and 9' length Only. Everest offers Quality by Design.
- Shown with the Everest Ford F450/F550 plow frame. This unit can be tied into central hydraulics or run independently using FISHER's fleet flex hydraulics
- Trip edge design plow.
- Poly skinplate.
- 1/2”x8” cutting edge SHCP pattern.
- 30” high moldboard curl with integrated steel deflector.
- Also available with optional A Frame to attach to a Fisher head gear.
|
|
|
Everest Snow Plow Model: RL-V Series Trip Edge
The Everest V-RL series trip edge plow is designed for municipal applications. It is modeled after the larger "Vortex' design. The plow is currently offered in 9' length Only. Everest offers Quality by Design.
- Shown with the FISHER headgear. This unit can be tied into central hydraulics or run independently with FISHER's fleet flex hydraulics.
- Trip edge design plow.
- Steel skinplate.
- 1/2”x8” cutting edge SHCP pattern.
- 30” high intake and 39" high discharge moldboard.
- Available with a rubber deflector.
- Also available with optional Everest A Frame to attach to an Everest 450/550 hitch.
|
|
|
Fisher Snowplow - HD2 Model
The rugged FISHER® HD2 Series plows will withstand the rigors of any and all commercial applications. Designed for 3/4 and 1 ton four-wheel drive trucks.
- Available in 8', 8'6", or 9' moldboard lengths
- Trip edge design
- 29" moldboard height
- 12-gauge steel moldboard
- Four trip springs
- Ten vertical ribs
- 1-1/2" x 12" angling rams
- Plowing width at full angle: 8' - 86" ; 8'6" - 91"; 9' - 96"
- Cast iron disc shoes (optional)
- Joy-stik or Fish-Stik control
- Cutting edge - included
- Low-profile dual-beam halogen headlamps
- Mounting: Minute Mount 2
- Hydraulics: Fleet Flex
|
|
|
Fisher Snowplow - Homesteader Model
The popular 6' 8" and 7'4" FISHER® Homesteader snowplow is perfect for homeowners. Make the most of your vehicle
with this personal use snowplow designed for today’s light trucks and SUV’s. Weighing as little as 250 lbs., the Homesteader meets all federal and manufacturers’ weight ratings for your vehicle, so there is no worry about overloading your front end, like with heavier plows.
- Available in 6'8" and 7'4" moldboard length
- Trip moldboard design
- 21" moldboard height
- Poly moldboard
- Two elastomer trip springs
- Four vertical ribs
- 1" x 7" angling rams
- 1/4" x 5" cutting edge standard
- 'Scrape lock' hydraulically locks blade down
- Joy-Stik or Fish-Stik control
- Low-profile, dual beam halogen headlamps
|
|
|
Fisher Snowplow - HT Model
Targeted specifically for today's half-ton 4WD pickup trucks, the FISHER® HT Series straight blade snow plow is a full-size, full-featured snow plow with the strength to handle standard-duty commercial, institutional and extended-use homeowner applications.
- Available in 7'6" moldboard length
- Trip edge design
- 27" moldboard height
- 14-gauge steel moldboard
- Two trip springs
- Six vertical ribs with horizontal tube
- 1-1/2" x 8" angling rams
- Plowing width at full angle: 79"
- Cast iron disc shoes
- Joy or Fish-Stik control
- Cutting edge - not included
- Low-profile, dual beam halogen headlamps
- Mounting: Minute Mount 2
|
|
|
Fisher Snowplow - MC Model
The popular 9' and 10' FISHER® MC snowplow is perfect for municipalities and contractors ideal for clearing large parking lots, narrow streets and intersections
REPLACED BY THE 'HC' MODEL FOR 2018-19
- Available in 9' or 10' moldboard length
- Trip edge design
- 34" moldboard height
- 11-gauge steel moldboard
- Four trip springs on 9'; six on 10'
- Eight vertical ribs
- 2" x 16" angling rams
- Plowing width at full angle: 9' - 95"; 10' - 106"
- Cast iron disc shoes
- 1/2" x 8" cutting edge standard
- Joy-Stik or Fish-Stik control
- Plow marker guides
- Low-profile, dual beam halogen headlamps
- Mounting: Minute Mount 2
|
|
|
Fisher Snowplow - SD Model
The popular 6' 9" and 7'6" FISHER® SD snowplow is perfect for homeowners, small businesses and light commercial plowing applications.
- Available in 6'9" and 7'6" moldboard length
- Trip edge design
- 26" moldboard height
- 14-gauge steel moldboard
- Two trip springs
- Eight vertical ribs
- 1-1/2" x 10" angling rams
- 1" x 6" poly cutting edge standard
- Plowing width at full angle: 6'9" - 73" ; 7'6" - 81"
- Cast iron disc shoes
- Joy-stik or Fish-Stik control
- Low-profile, dual beam halogen headlamps
- Mounting: Minute Mount 2
|
|