products

Snowplows

Fisher

Fisher Snowplow - HD2 Model

Fisher Snowplow - HD2 Model

The rugged FISHER® HD2 Series plows will withstand the rigors of any and all commercial applications. Designed for 3/4 and 1 ton four-wheel drive trucks.

  • Available in 8', 8'6", or 9' moldboard lengths
  • Trip edge design
  • 29" moldboard height
  • 12-gauge steel moldboard
  • Four trip springs
  • Ten vertical ribs
  • 1-1/2" x 12" angling rams
  • Plowing width at full angle: 8' - 86" ; 8'6" - 91"; 9' - 96"
  • Cast iron disc shoes (optional)
  • Joy-stik or Fish-Stik control
  • Cutting edge - included
  • Low-profile dual-beam halogen headlamps
  • Mounting: Minute Mount 2
  • Hydraulics: Fleet Flex

Fisher Snowplow - Homesteader Model

Fisher Snowplow - Homesteader Model

The popular 6' 8" and 7'4" FISHER® Homesteader snowplow is perfect for homeowners. Make the most of your vehicle with this personal use snowplow designed for today’s light trucks and SUV’s. Weighing as little as 250 lbs., the Homesteader meets all federal and manufacturers’ weight ratings for your vehicle, so there is no worry about overloading your front end, like with heavier plows.

  • Available in 6'8" and 7'4" moldboard length
  • Trip moldboard design
  • 21" moldboard height
  • Poly moldboard
  • Two elastomer trip springs
  • Four vertical ribs
  • 1" x 7" angling rams
  • 1/4" x 5" cutting edge standard
  • 'Scrape lock' hydraulically locks blade down
  • Joy-Stik or Fish-Stik control
  • Low-profile, dual beam halogen headlamps

Fisher Snowplow - HT Model

Fisher Snowplow - HT Model

Targeted specifically for today's half-ton 4WD pickup trucks, the FISHER® HT Series straight blade snow plow is a full-size, full-featured snow plow with the strength to handle standard-duty commercial, institutional and extended-use homeowner applications.

  • Available in 7'6" moldboard length
  • Trip edge design
  • 27" moldboard height
  • 14-gauge steel moldboard
  • Two trip springs
  • Six vertical ribs with horizontal tube
  • 1-1/2" x 8" angling rams
  • Plowing width at full angle: 79"
  • Cast iron disc shoes
  • Joy or Fish-Stik control
  • Cutting edge - not included
  • Low-profile, dual beam halogen headlamps
  • Mounting: Minute Mount 2

Fisher Snowplow - MC Model

Fisher Snowplow - MC Model

The popular 9' and 10' FISHER® MC snowplow is perfect for municipalities and contractors ideal for clearing large parking lots, narrow streets and intersections REPLACED BY THE 'HC' MODEL FOR 2018-19

  • Available in 9' or 10' moldboard length
  • Trip edge design
  • 34" moldboard height
  • 11-gauge steel moldboard
  • Four trip springs on 9'; six on 10'
  • Eight vertical ribs
  • 2" x 16" angling rams
  • Plowing width at full angle: 9' - 95"; 10' - 106"
  • Cast iron disc shoes
  • 1/2" x 8" cutting edge standard
  • Joy-Stik or Fish-Stik control
  • Plow marker guides
  • Low-profile, dual beam halogen headlamps
  • Mounting: Minute Mount 2

Fisher Snowplow - SD Model

Fisher Snowplow - SD Model

The popular 6' 9" and 7'6" FISHER® SD snowplow is perfect for homeowners, small businesses and light commercial plowing applications.

  • Available in 6'9" and 7'6" moldboard length
  • Trip edge design
  • 26" moldboard height
  • 14-gauge steel moldboard
  • Two trip springs
  • Eight vertical ribs
  • 1-1/2" x 10" angling rams
  • 1" x 6" poly cutting edge standard
  • Plowing width at full angle: 6'9" - 73" ; 7'6" - 81"
  • Cast iron disc shoes
  • Joy-stik or Fish-Stik control
  • Low-profile, dual beam halogen headlamps
  • Mounting: Minute Mount 2